塔河油田奥陶系储层构造应力场研究     

刘佳庚  李静  苏玉亮  范作松  刘旭亮  郭豪 《地质力学学报》2020,26(1):48-54

油气储层构造应力场的分布特征，对油气运移、注采井网布置、储层改造等具有重要意义。为此，文章从塔河油田AD13井区的地质构造演化入手，基于油田测井资料，结合弹性力学及有限元理论，建立研究区地应力弹性力学计算模型，利用有限元软件对研究区储层地应力进行模拟研究，并将模拟结果与现场地应力实测值进行对比分析。结果表明，研究区最大水平主应力为102~130 MPa，最小水平主应力为87~110 MPa，均为压应力；研究区东部及南部最大水平主应力方向为北东向，西北部最大水平主应力方向为北东东向，西南部最大水平主应力方向为南东向，地应力大小及方向均与实际结果相符。研究结果可为研究区油气勘探开发工程提供科学依据。   相似文献   

Effects of fluid displacement pattern on complex electrical impedance in Berea sandstone over frequency range 104–106 Hz          下载免费PDF全文

Yi Zhang  Hyuck Park  Osamu Nishizawa  Tamotsu Kiyama  Yu Liu  Kwangseok Chae  Ziqiu Xue 《Geophysical Prospecting》2017,65(4):1053-1070

To better understand the effect of fluid distribution on the electric response of rocks saturated with oil and brine, we conducted experimental studies on the complex electrical impedance in a Berea sandstone, together with in situ acquisitions of oil distribution images employing a high‐resolution medical X‐ray computed tomography. We performed two tests of brine displacement by oil under high (10 MPa) and low (5 MPa) pressures, which were accompanied by fingering and stable displacement patterns, respectively. The measured complex impedance data were fitted to the Cole model to obtain the resistance, capacitance, peak frequency of the imaginary impedance, and the exponent α of the rock–fluid system. With increasing oil saturation, the resistance showed an increasing trend, whereas the other three parameters decreased. The fingering displacement exhibited lower resistance and capacitance than the stable displacement. The analysis of the resistance changes using a simple parallel connection model indicates that there are more components of residual brine in parallel connections in the fingering pattern than in the stable displacement pattern at the same saturation. We also interpreted the normalised changes in the capacitance (or apparent dielectric constant) with respect to the oil saturation via an analysis of the shape factor of fluid distribution based on the Maxwell–Wagner–Brugermann–Hanai model. The changes in the shape factor suggest that the pinch‐off of the brine in parallel connection by the oil is a dominant mechanism reducing the capacitance. In the stable displacement, most of the connections in the brine phase are immediately pinched off by oil displacement front at a local oil saturation of 65%. Conversely, in the fingering displacement, there is a transition from the bulk or layered brine to the pinched‐off at a local oil saturation below 60%. The analyses indicate that the difference in the fluid distribution under different fluid conditions is responsible for the non‐Archie behaviour.  相似文献   

Characterisation and multifaceted anisotropy assessment of Corvio sandstone for geological CO2 storage studies          下载免费PDF全文

Ismael Falcon‐Suarez  Jacobo Canal‐Vila  Jordi Delgado‐Martin  Laurence North  Angus Best 《Geophysical Prospecting》2017,65(5):1293-1311

We present a comprehensive characterisation of the physical, mineralogical, geomechanical, geophysical, and hydrodynamic properties of Corvio sandstone. This information, together with a detailed assessment of anisotropy, is needed to establish Corvio sandstone as a useful laboratory rock‐testing standard for well‐constrained studies of thermo–hydro–mechanical–chemical coupled phenomena associated with CO₂ storage practices and for geological reservoir studies in general. More than 200 core plugs of Corvio sandstone (38.1 and 50 mm diameters, 2:1 length‐to‐diameter ratio) were used in this characterisation study, with a rock porosity of 21.7 ± 1.2%, dry density 2036 ± 32 kg m^?3, and unconfined compressive and tensile strengths of 41 ± 3.28 and 2.3 ± 0.14 MPa, respectively. Geomechanical tests show that the rock behaves elastically between ～10 and ～18 MPa under unconfined conditions with associated Young's modulus and Poisson's ratio of 11.8 ± 2.8 GPa and 0.34 ± 0.01 GPa, respectively. Permeability abruptly decreases with confining pressure up to ～10 MPa and then stabilises at ～1 mD. Ultrasonic P‐ and S‐wave velocities vary from about 2.8–3.8 km s^?1 and 1.5–2.4 km s^?1, respectively, over confining and differential pressures between 0.1 and 35 MPa, allowing derivation of associated dynamic elastic moduli. Anisotropy was investigated using oriented core plugs for electrical resistivity, elastic wave velocity and attenuation, permeability, and tracer injection tests. Corvio sandstone shows weak transverse isotropy (symmetry axis normal to bedding) of <10% for velocity and <20% for attenuation.  相似文献   

萍乐凹陷东段逆冲推覆构造特征及油气资源效应     

邵威  李建青  方朝刚  刘桃  黄正清  廖圣兵  王元俊 《地质论评》2024,70(S1):269-271

  相似文献   

Borehole failure analysis in a sandstone under anisotropic stresses     

Euripides Papamichos 《国际地质力学数值与分析法杂志》2010,34(6):581-603

Borehole failure under anisotropic stresses in a sandstone is analyze numerically for various borehole sizes using a nonlinear elastic–plastic constitutive model for a Cosserat continuum. Borehole failure is identified as macroscopic failure of the borehole through the development of shear bands and breakouts. The results compare well both qualitatively and quantitatively with experimental results from polyaxial tests on Red Wildmoor sandstone. They show that the hole size effect of the borehole failure strength is independent of the far‐field stress anisotropy and follows a ? power law of the hole size. A similar scale effect equation with a ? power law is proposed for the scale effect of the maximum plastic shear strain at failure. This equation can be useful for better predicting hole‐size‐dependent failure with standard codes based on classical continua. The effect of stress anisotropy on the borehole failure stress is found to be independent of the hole size. The failure stress decreases linearly to 40% as the stress anisotropy increases. However, the maximum plastic shear strain at failure is stress anisotropy independent and therefore the critical plastic shear strain for failure is only hole‐size dependent. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

哈拉哈塘地区东河砂岩段-角砾岩段沉积模式探讨     

徐正华  马青  徐大宝  邬兰  徐智  杨春梅 《海洋地质译丛》2010,(1):26-30

塔北的哈拉哈塘地区是东河砂岩油气勘探的重点地区，该地区目前已发现并探明了东河塘和哈得4两个东河砂岩油气藏，油气储量丰富，显示出良好的勘探前景。基于哈拉哈塘地区东河砂岩段和角砾岩段的岩性段穿时沉积现象异常明显，根据层序地层学原理和方法对哈拉哈塘地区东河砂岩段一角砾岩段进行了重新分层和对比，在层序分层等时地层框架的基础上重新进行了东河砂岩段一角砾岩段沉积模式研究，弄清该地区地层分布规律、演化规律、砂体分布及储层分布规律对该地区的油气勘探具有重要指导意义。  相似文献   

Reprint of: Diagenetic controls on evolution of porosity and permeability in lower Tertiary Wilcox sandstones from shallow to ultradeep (200–6700 m) burial,Gulf of Mexico Basin,U.S.A.     

Shirley P. Dutton  Robert G. Loucks 《Marine and Petroleum Geology》2010

Reservoir quality is a critical risk factor in deep to ultradeep reservoirs at depths >4.5 km. Analysis of Paleogene Wilcox sandstones on the upper Texas Gulf Coast provides insight into the evolution of reservoir quality during shallow to ultradeep burial diagenesis. Reduction of porosity and permeability with burial in Wilcox sandstones was evaluated using subsurface samples from 200 to 6700 m, at temperatures of 25–230 °C. Diagenesis and petrophysical properties were interpreted from petrographic data and core analyses. Wilcox sandstones are mostly lithic arkoses and feldspathic litharenites having an average composition of Q₅₉F₂₂R₁₉. Provenance did not change significantly during Wilcox deposition in this area, nor does average sandstone composition vary among lower, middle, and upper Wilcox sandstones. However, composition does vary with sequence-stratigraphic position; lowstand slope-fan deposits contain more rock fragments than do deposits from highstand or transgressive systems tracts. Given observations from this onshore dataset, Wilcox sandstones deposited in deepwater environments in the Gulf of Mexico are likely to contain more rock fragments than their linked highstand equivalents.  相似文献   

西湖凹陷西次凹古近系花港组—平湖组深层油气成藏过程          下载免费PDF全文

刘春锋  蒋一鸣  李宁  郭小波  马剑  张武  熊志武 《地质学报》2024,98(1):231-246

西湖凹陷西次凹古近系花港组和平湖组深层油气资源丰富，是东海陆架盆地勘探开发新领域，受储层差异致密化影响，油气成藏机理复杂。为了厘清西次凹深层油气成藏过程，本文通过流体包裹体岩相学特征、显微测温、激光拉曼光谱、包裹体所含油气地球化学等实验分析，结合构造演化、地层埋藏史、热史等，开展了系统的储层特征、油气成藏期次、成藏过程研究。结果表明，花港组深层（>4000 m）和平湖组储层均已致密化，溶蚀孔隙是主要的储集孔隙类型；花港组和平湖组均发育两期油气包裹体，早期含油包裹体较多，晚期以天然气包裹体为主，成藏时间分别为龙井运动期和冲绳运动期，以晚期天然气成藏最为关键。包裹体中油气地球化学特征类似，反映生烃母质以高等植物生源为主，低等生物为辅，与平湖组煤系烃源岩特征一致。冲绳运动叠加平湖组生气增压是晚期天然气成藏的主要动力，此时H10段及以上储层未致密化。根据储层致密化与成藏时序匹配关系可将西次凹M构造深层油气藏类型划分为常规型、先成藏后致密型、先致密后成藏型和边成藏边致密型4种。本文成果可为研究区下一步致密砂岩气的勘探开发部署提供重要的理论依据。  相似文献   

HD-1注汽井新型防砂材料的研究与应用     

沈朝霞  梁富春  高成元  刁俊西  孙理达 《海洋地质译丛》2010,(3):61-63

孤岛油田属稠油疏松砂岩油藏,生产过程中油井出砂严重,现有的涂敷砂人工井壁防砂注蒸汽后强度较低,造成防砂成功率低,注汽后高强度采液生产周期较短。为此,通过室内试验,优选出耐高温树脂、高强度骨架颗粒、偶联剂、固化剂,进行室内配方优化试验,评价固结体耐高温性能,测定其渗透率,研制出一种适用于疏松砂岩油藏注蒸汽热采井的HD-1注汽井新型防砂材料。在孤岛油田稠油注蒸汽热采区共试验72口井,成功率为91.0%,截止目前,累计产油为121 572 t,单井平均有效期为233 d。现场应用表明：HD-1注汽井新型防砂材料耐高温、强度高,防砂成功率高,有效期长,能够有效改善注蒸汽热采井的防砂效果。  相似文献   

鄂尔多斯盆地镇北地区长3储层微观非均质性的实验分析   总被引：10，自引：0，他引：10  

刘林玉  张龙  王震亮  高潮 《沉积学报》2007,25(2):224-229

油气储层的微观非均质性特征是储层地质学研究的重要内容之一。本文的目的是研究鄂尔多斯盆地镇北地区长3储层微观非均质性特征,研究方法是利用真实砂岩微观模型实验。通过实验发现鄂尔多斯盆地镇北地区长3和储层为致密型砂岩,真实砂岩微观模型实验直观地显示出鄂尔多斯盆地镇北地区长3储层具有很强的微观非均质性,砂岩的成岩作用和孔隙结构是影响本区长3储层微观非均质性的主要原因。在低渗透砂岩中,溶蚀作用引起砂岩产生强烈的非均质性,而这些砂岩则形成长3储层的高渗带。  相似文献